Visara 1783 - Manual (Page 89)

Chapter 8: Using Telnet, TN3270, TN5250 and VT220
707042-002 8-13
• Mod 5 17 CPI – If selected, printing automatically changes to 17 CPI (characters per
inch) if the application screen is Mod 5.
• Wide Paper – If enabled, allows printing of more than 80 characters per line. This
setting is generally used when Proprinter is selected as the Printer Type.
• CPI Selection – Specifies the number of Characters Per Inch to print. Options are
10, 10.5, 12, and 17 CPI.
• LPI Selection – Specifies the number of Lines Per Inch to print. Options are 3, 4, 6,
8, and 8.4 LPI.
• Lines per page – Specifies the number of Lines per Page to print. Selectable range
is 0-255.
• Line Feed – Sends an immediate Line Feed to the selected printer.
• Form Feed – Sends an immediate Form Feed to the selected printer
• LPR Menu – Displays the LPR configuration menu. The LPR menu button is gray
when LPR is disabled and green when enabled.
LPR menu
To configure LPR, select the LPR Menu button. The LPR Setup panel is shown below:
• Enable LPR – Select to enable LPR printing.
• LPR scroll window – Used to select an LPR printer. A blue background indicates
the printer is selected.
• Local Name – User-defined name of the printer.
• Remote Name – Queue name that print jobs are sent to from an LPR-enabled device.
• Remote Address – IP address of the selected printer.
Click OK to save changes and exit, or Cancel to exit and discard any changes.