Visara 1783 - Manual (Page 76)

1783 Network Computing Terminal User’s Manual
707042-002 7-14
Restarting the 1490 Emulator
1. Click Setup in the upper left-hand corner of the screen to open the 1490 Setup menu.
2. Click Miscellaneous . The 1490 Miscellaneous screen is shown below.
3. Click Stop Twinax .
4. Click the OK button. This stops the 1490 from responding to the controller and the
menu will be removed from the screen.
CAUTION: All data on the 1490 screen and unprinted data will be lost.
When 1490 screen data is erased the Miscellaneous panel will disappear and the cursor is
placed in the upper right corner of the screen.
5. To open the miscellaneous menu, repeat steps 1 and 2.
6. Click Start Twinax .
7. Click the OK button to restart the Twinax communications and initiate the exchange
of configuration items with the controller.