Visara 1783 - Manual (Page 155)

707042-002
Chapter 13: System Administrator’s Guide
13-7
Adding Gateway Connections
• Default Gateway - Enter the Gateway address in the Default Gateway text block.
• Disable RIP - Selecting this button will disable the forwarding of Routing Information
Protocol packets received by the 1783.
• Static Routes
- Enter Destination Static Route in the Destination Field.
- Enter the Gateway in the Gateway field.
• Click Add to add the Static route
• Select the Static Route to be removed and click Remove to remove the static route
from the table.
• Select the Static Route to be modified and click Modify to change the Static route.
• Click Apply to accept all the information that has been entered.
• Click Done to exit when complete.
• Click Cancel to discard changes and exit.
DNS tab
• Domain – Enter your organization’s domain name for the primary connection.
• Domain Name Servers – Enter the IP address of your organization’s domain name
server. This is a mandatory field. Up to three server addresses may be entered; the
address at the top of the list is always primary.