Configuring nct miscellaneous, Autostart, selecting application for, Nct miscellaneous – Visara 1783 User Manual
Page 158: Nct miscellaneous, configuring, Operator password, Configuring nct miscellaneous -10
1783 Network Computing Terminal User’s Manual
707042-002
13-10
•
Autostart
– The Loadable application selected is started automatically when the
1783 is powered on.
•
Start Full Screen
– If Autostart has been chosen for the selected application, this
option may be chosen to have the application loaded as a full screen, rather than a
windowed application.
Note: To exit from full screen mode, press key chord: Ctrl - Alt - Tab.
•
Delete
– Applications that will not be used may be deleted to free up flash memory
space. Select the application and press
Delete
.
CAUTION: Once an application has been deleted a flash update will be required to
restore it.
Configuring NCT Miscellaneous
1. Click
Configure
in the upper left-hand corner of the Administrator Function
dialog panel.
2. Click
NCT Miscellaneous
.
•
Operator Password Required
– The user will be prompted for a password
upon startup.
•
Display resolution
– The default setting from the manufacturer is 640 x 480. To
change to a higher resolution, select the 800 x 600 button, the 1024 x 768 button, or
the 1280 x 1024 button.
CAUTION: Selecting a resolution that your display cannot support could result in inability
to use the 1783 NCT. To revert to 640 x 480 resolution, hold down the R key and restart
the 1783 NCT.
•
Vertical Refresh Rate
– Select the refresh rate that is supported by your monitor.