Visara 1783 - Manual (Page 108)

1783 Network Computing Terminal User’s Manual
707042-002 8-32
Screen Print
• Printer Type – Specifies the printer driver to use when printing.
• Lines per Inch – Specifies the number of Lines Per Inch to print.
• Characters per Inch – Specifies the number of Characters Per Inch to print.
• Lines per page – Specifies the number of Lines per Page to print. Selectable
range is 0-255.
• Draft Quality – Prints draft quality when selected. Otherwise printing is
letter quality.
• Attributes – If selected, prints intensified characters as bold and underlined
when required.
• Portrait – If enabled, prints in Portrait mode. If disabled, prints in Landscape mode.
• Mod 5 17 CPI – If selected, printing automatically changes to 17 CPI (characters
per inch) if the application screen is Mod 5.
• Wide Paper – If enabled, allows printing of more than 80 characters per line.
This setting is generally used when Proprinter is selected as the Printer Type.
• LPR Setup
• Enable LPR - Select to enable the VT220 client to send print jobs to a LPD
node such as a print server
• LPR Printer Window - Select the defined printer that will receive VT220
print jobs. Once selected, the Local Name, Remote Name, and Remote Address
will be displayed below the LPR Printer Window.
• Line Feed – Sends an immediate Line Feed to the selected printer.
• Form Feed – Sends an immediate Form Feed to the selected printer