Visara 1783 - Manual (Page 54)

1783 Network Computing Terminal User’s Manual
6-16 707042-002
HAP Menu
The Host Addressable Print feature enables the host to send print requests to the 1783’s
attached printer. LU2 (screen) prints are always formatted by the display according to the
printer menu selections. To enable or disable HAP, click the
HAP Menu button from
within the 1480 Print Setup Screen. The Host Addressable Print configuration screen will
appear:
• Enable HAP – Select to enable the HAP feature.
• Suppress Null Lines – Selection of this item will cause null lines to be removed
from formatted (40/64/80 CPI) HAP LU3 prints. Null lines are lines that contain only
non-printable characters (such as nulls, attributes or alphanumeric characters in a non-
print field).
• Suppress automatic line feed when :
– CR at MPP + 1 – If this option is selected, when the printer reaches the
Maximum Print Position + 1 (the end of the print line), the carriage returns to the
beginning of the line without a line feed. The next printed characters will overwrite
the current line of printed characters. If this option is not selected, (the default),
when the printer reaches the end of the line, the carriage returns to the beginning
of the line and drops down one line.
– NL at MPP + 1 – If this option is selected, the printer does not execute a line
feed if there is a new line command at the Maximum Print Position + 1 (the end
of the print line). The printer begins printing on the next line. If this option is not
selected (the default), when the printer reaches the end of the line, it executes two
line feeds.
– FF at print end – If this option is selected, the printer does not execute a line
feed after a form feed. If this option is not selected (the default), the printer
executes a line feed after a form feed. Characters printed on the new page begin
on the second line.