RLE FMS V.1.13 - Manual (Page 99)

rletech.com FMS User Guide 99
3 Web Interface Configuration
3.4.23 BACnet
Use this page to allow a Building Management System (BMS) to poll the FMS inputs using
the BACnet protocol over LAN connections. Options are at the top of the page; supported
BACnet capabilities are at the bottom of the page. For further information, consult the BACnet
standard or your IT department.
If you wish to configure your FMS as a BACnet master or slave, you must first configure
BACnet communications on this page.
Figure 3.38 BACnet Configuration Pages
Option Description
BACnet Device
Name
Assign a name - up to 38 characters - to the unit for BACnet
discovery and integration. This is the name of the FMS as it will
appear on the BACnet network.
BACnet Device ID Assign a unique identifier for this BACnet device, up to 30
characters.
BACnet Description Add any additional details for the device, up to 38 characters.
Table 3.26 BACnet Configuration Options