RLE FMS V.1.13 - Manual (Page 80)

80 FMS User Guide 800.518.1519
3 Web Interface Configuration
3.4.13.1 Configure Phone Numbers
Up to 15 unique phone numbers can be configured to receive FMS alarm notifications. Use the
numerical links at the bottom of the phone number configuration screen to set these pager and
cell phone numbers.
Figure 3.27 Phone Number Configuration
Option Description
Select Phone Type Determines which type of device the FMS calls.
• Choose the Alpha-numeric Pager/Cell Phone option to dial an
alphanumeric pager or cell phone.
• Choose SMS/TEXT/GSM if using a GSM modem that is
connected to the FMS COM1 EIA-232 port.
• Choose SNPP for paging over Ethernet - this is a feature some
cell/pager providers do not support.
TAP Number/SNPP
Server
Enter the pager service number for alphanumeric pager or cell
phone entries. If using the SMS/TEXT/GSM, enter the cell phone
number to dial.
Each comma after the number represents a two second delay. This
delay allows time for the service to answer before requesting the
pager ID. Typically, it will only be necessary to use one comma
between pager numbers. However, based on set-up and pager
services, users may need to experiment with the number of
commas that are used. In some cases, a 9 must be entered to
access an outside line.
Table 3.16 Phone Number Configuration Options