RLE FMS V.1.13 - Manual (Page 79)

rletech.com FMS User Guide 79
3 Web Interface Configuration
Pager Baud Rate Allows users to determine the connection speed. Select 300, 1200,
2400, 9600, or 33.6k.
Default: 1200
Pager Bits/Parity Allows the user to set the pager communications settings. Select 7
bit, even parity or 8 bit, no parity to match the settings of the pager
service provider's TAP service phone number.
Pager Resend Yes: When the FMS sends an alarm notification, it will send all
unacknowledged alarms in the Alarm History Menu.
No: When the FMS sends an alarm notification, it will send only the
last unacknowledged alarm. The FMS will also auto-acknowledge
all alarms associated with that particular pager once a successful
page has occurred.
Default: No
Modem Password Defines a remote access password, seven characters maximum.
The password is used when remotely logging into the FMS through
a modem.
Redial Attempts Determines the number of times (1–255) to call a number until the
call is successful. Enter 0 to disable this function.
Redial Interval Establishes the number of minutes (1–-255) to wait between
redials. Enter 0 to disable this function.
Force Alarm
Acknowledge Code
Establishes a code that acknowledges all unacknowledged alarms.
This acts as a master code and can override all other alarm
acknowledge codes.
Default: None (left blank)
Pager Message Strip
Timestamp
Check to remove the alarm timestamp from the pager message.
This reduces the size of the pager message as the user can
estimate when the alarm occurred based on when the page was
received.
Default: unchecked
Option Description
Table 3.15 Modem/Phone Numbers/Pagers Configuration Options