RLE FMS V.1.13 User Manual
Page 53

rletech.com
FMS User Guide
53
3
Web Interface Configuration
Note Press the Submit Changes button when done to save all changes.
Text Direction
Used for graphical mapping - decide if you’d like the text on the
map for this object (temperature reading, humidity reading, sensor
value, etc.) to be horizontal or vertical.
Map Coordinate
Fine tune the location of the object on the map. Refer to
“Facility
Mapping” on page 129
for further information.
Graphical Mapping
Designate the device’s location on the FMS graphical map.
Test Map
View the mapped location of the point you’re currently configuring.
Digital Input Color -
Active and Inactive
Inputs configured for Digital Status do not trigger notification.
Instead, use this option to set the display color for Digital Status
points on the Main Menu when the input in its inactive state, and
also when it is turned on to its active state.
The options include red, gold, magenta, gray, and green.
Typically, points are configured to be green in their inactive state
and then to turn red on alarm.
Option
Description
Table 3.3
FMS Main Board Configuration Options