RLE FMS V.1.13 - Manual (Page 28)

28 FMS User Guide 800.518.1519
2 Getting Started
2.2.4 Keypad Connection
The FMS can be configured with a 3 x 4 keypad interface. Entering a user code, configured
through software, activates a relay output which unlatches a door and allows an individual to
enter the secure area. Entering the correct user code can also trigger a relay output to signal an
IP camera to snap a picture and email it to a predefined recipient. Connect the keypad as
shown in Figure 2.6 . For more information on configuring the keypad function, see 4.15.,
“Keypad/DTMF Access Users” on page 77 .
Figure 2.6 Keypad Wiring
2.2.5 EIA-232 COM2 Connection
The EIA-232 port can be connected to a PC for IP configuration, firmware downloads, and
troubleshooting. It is typically a temporary connection. Connect the straight through, 9-pin,
cable as shown in Figure 2.7 .
Figure 2.7 EIA-232 COM2 Connection