RLE FMS V.1.13 - Manual (Page 105)

rletech.com FMS User Guide 105
3 Web Interface Configuration
The numbers in the Unit # column are links. Click the links to configure the individual slave
devices.
Figure 3.41 Modbus/SNMP/BACnet Slave Configuration Page
Option Description
Communications Configure the FMS to send Modbus requests to a specific slave
device over either a serial connection (EIA-232 or EIA-485) or over
TCP/IP. This configuration can be different for each slave unit.
TCP/UDP/IP IP
Address
Enter the IP address of the slave unit here.
Protocol This option allows the FMS to send appropriate requests to each
slave device. Refer to the documentation of the slave device for
proper configuration.
The FMS supports the following communications protocols:
• Modbus Standard
• Modbus Extended
• JBus
• SNMP V1
• SNMP V2
• BACnet/IP
BACnet Destination
Network
If the device is on another network, specify the destination network
here.
Table 3.28 Modbus/SNMP/BACnet Slave Configuration Options