RLE FMS V.1.13 User Manual
Page 219
rletech.com
FMS User Guide
219
H
SNMP v3
Analog Trap Varbinds
This feature is used for communication to an NMS via SNMP
Traps.
The default adds the Value, UOM (Unit of Measure), and
Label fields to the message.
Label Only: Sends only the label on analog Traps. This makes
analog Traps the same format as digital Traps, which may
make parsing the Traps easier for the NMS.
Default: Value/UOM/Label
Trap Severity Varbind
If the severity should be included in the trap, indicate that
here.
Persistent Trap/Inform
Interval
This feature allows the FMS to issue continuous SNMP Traps
until an alarm acknowledgement is received by the FMS or
until the alarming point returns to normal. The SNMP Traps do
not include any delivery verification. Traps can be
acknowledged from the Alarm Management page.
A Persistent Trap setting of 5 or 10 minutes will trigger the
FMS to send the Trap on a regular interval in case the
previous Trap did not reach the Network Management System
(NMS). Typically, the NMS can be set to ignore duplicate
Traps to prevent re-alarming at the NMS.
This user-defined time interval is set in minutes. Enter 0 to
send the message just once.
Configuration Changed
Trap Community
If someone changes the FMS’s configuration, it will send a
trap to each of the four communities listed below.
0 disables this functionality.
Default: 0 (disabled)
Syslog Facility
The severity is communicated to the Syslog server. A facility
level is used to specify what type of program is logging the
message.
Trap Destinations
IP Address
The IP address of the server to the trap information to.
TrapEnable
Check this box to indicate that trap information should be sent
to the specified server.
Syslog Message
Check this box to indicate that syslog messages should be
sent to the specified server.
SnmpV3
Engine ID
An uneditable field that lists the engine ID.
Context Name
Enter the alphanumeric name used for the SNMP v3 interface.
V3 Trap User (1-4)
Enter the number of the user you are creating or modifying.
Option
Description
Table H.1
SNMP v3 Trap Settings