RLE FMS V.1.13 User Manual
Page 85
rletech.com
FMS User Guide
85
3
Web Interface Configuration
Http Port
Some ISPs use alternate http ports as an added security measure.
Edit this field in accordance with your ISPs security settings.
By default, the FMS broadcasts its web pages on Port: 80 of the
assigned IP Address. A zero in the field defaults the FMS to Port:
80.
Default: 0 = Port 80
TFTP Server Enable
(udp port 69)
This setting opens or closes Port 69 on the LAN connection to the
FMS.
This TFTP port is used to upgrade firmware and save and load
configurations. It can be disabled for security reasons and only
opened for short periods of time during firmware upgrades. See
Chapter 8, “Load Firmware and Configuration Data” on page 171
for more information.
TCP Max Seg Size
This adjusts the size of the web page packets being broadcast.
Default size is set to 1436, you may need to set it to 536 for VPN
access or satellite uplink networks.
Default: 1436
PPP Server
This option sets the IP Address of the FMS network connection
when accessing the FMS via its internal modem.
This is required to allow a remote PC to view the FMS web pages
over a dial-up connection; see
Chapter 7, “Point-to-Point Protocol”
, for more information.
PPP Assignment
Use this feature to set the IP Address of the remote PC’s network
connection when accessing the FMS via its internal modem.
This is required to allow a remote PC to view the FMS web pages
over a dial- up connection. The remote PC’s dial-up settings should
be set to “Obtain an IP Address Automatically.”
Option
Description
Table 3.19
IP Configuration Options