RLE FMS V.1.13 - Manual (Page 218)

218 FMS User Guide 800.518.1519
H SNMP v3
Option Description
MIB-2 System Options
System Name Designate a unique name for this FMS. This name appears on
the FMS Main Menu and is included as part of email and
pager notifications.
The System Name can also be viewed and changed in the
System Configuration Menu.
System Contact This is the individual responsible for the FMS. This system
contact identifier is only available through SNMP Gets and is
not included in email, pager, or SNMP Trap notifications.
System Location List the physical location of the FMS. It is used to help identify
the FMS when viewing the web pages. The System Location
is not included in email, pager, or SNMP Trap notifications.
V1/V2C Community Names
Get/Read Enter the appropriate community name.
Set/Write Enter the appropriate community name.
Trap Enter the appropriate community name.
Traps Options
Select SNMP Trap Type Select the SNMP version that best suits your needs; V1-Trap,
V2C-Trap, V2C-Inform, V3-Trap, or V3-Inform.
Input Trap Delivery Choose whether you’d prefer LAN or PPP (modem/dial-up).
Trap Type AlarmEntryAdded: This setting simplifies configuration of the
NMS, since the NMS only needs to be configured for a couple
Traps.
• An “AlarmEntryAdded” Trap will be sent anytime a new
alarm is added to the Alarm History log. The
“AlarmEntryAdded” Trap contains the Alarm Label. The
NMS can receive this Trap and extract and display the
Alarm Label.
• An “AlarmEntryRemoved” Trap (also contains the Alarm
Label) will be sent anytime a Return to Normal Alarm is
added to the Alarm History log.
falconPortTraps: This option requires more configuration at
the NMS, but may make it easier to display, set severity, and
parse the data in the NMS. This option enables two Traps per
FMS input:
• “FalconPortxxTrap” which is sent when an input goes into
alarm
• “FalconPortxxTrapClear” which is sent when the input
returns to normal.
Default: AlarmEntryAdded
Table H.1 SNMP v3 Trap Settings