RLE FMS V.1.13 - Manual (Page 172)

172 FMS User Guide 800.518.1519
8 Load Firmware and Configuration Data
IMPORTANT Do not change the name of the firmware file when you save it. Otherwise, the FMS will not
recognize the file.
3 On the FMS web interface, go to Configuration>Flash Program.
Figure 8.1 Flash Program Configuration Page
4 Click the Choose File or Browse button.
5 Locate and choose the firmware file (.bin) that you saved from the RLE website.
The path and name of the firmware file (.bin) displays in the field to the left of the Browse
button.
Figure 8.2 Choose the Firmware File