RLE FMS V.1.13 - Manual (Page 45)

rletech.com FMS User Guide 45
3 Web Interface Configuration
3.4.1.1 Main Card - Input Channels 1-8
Inputs 1 - 8 reside on the FMS’s main circuit board. Click the input you’d like to configure.
The number of the input you’re configuring appears in the bar at the top of the configuration
page. Depending on which type of input you’re configuring, you’ll have different menu
options. The following table should address all the options available across the different input
types.
Note Users must push the Submit Changes button after they configure each input. Changes not
submitted before proceeding to the next input will be lost.
Figure 3.6 FMS Main Board Input Configuration
Option Description
Current Readings Displays the input current as sensed by the FMS and the calculated
value which factors in the designated gain and offset settings.
Next Input /
Prev Input Click these links to advance to the next installed FMS input, or
move back to the previous input.
Table 3.3 FMS Main Board Configuration Options