Orion System VCM-X/RNE Controller - Manual (Page 90)

INDEX
VCM-X / RNE Operator Interface SD 90
V-Z
V
VAV/Zone
AHU Heat Call Space
Temperature.........69
Box Heat Allow.........66
Confi guration.........65
Controllers.........65
,
74
COOLING ONLY BOX.........65
Damper Airfl ow
Cool/Heat Minimum.........69
Integral.........69
Maximum.........69
Vent Minimum.........69
Damper Airfl ow Fixed Position.........70
Damper Airfl ow Night
Minimum.........70
Damper Airfl ow Reheat
Minimum.........70
Day/Night Schedule.........71
Dump Zone.........67
Expansion Relays Heating
Stages.........66
H/C CHANGEOVER BOX.........65
Main Fan Status.........66
Maximum EMS Offset.........71
Maximum Slide Offset.........71
Occupied Setpoints.........68
PARALLEL FAN BOX.........65
Pressure Independent Airfl ow
Constant.........66
Proportional Heating Signal.........66
Push-Button Override.........66
Push-Button Override Duration.........71
Sensor Calibration for Space
Temperature.........71
Sensor Calibration for Supply Air
Temperature.........71
SERIES FAN BOX.........65
Unoccupied Setbacks.........68
Voting Zone.........66
Zone Alarm Delay.........70
Zone Alarm Offsets.........70
VAV/Zone Confi guration
Damper Operation.........65
VAV/Zone Setpoints
AHU Heat Call Space
Temperature.........69
Damper Airfl ow
Cool Minimum.........69
Heat Minimum.........69
Integral.........69
Maximum.........69
Vent Minimum.........69
Damper Airfl ow Fixed Position.........70
Damper Airfl ow Night
Minimum.........70
Damper Airfl ow Reheat
Minimum.........70
Day/Night Schedule.........71
Fan On Min.........70
Maximum EMS Offset.........71
Maximum Slide Offset.........71
Occupied Setpoints.........68
Push-Button Override Duration.........71
Sensor Calibration for Space
Temperature.........71
Sensor Calibration for Supply Air
Temperature.........71
Unoccupied Setbacks.........68
Zone Alarm Delay.........70
Zone Alarm Offsets.........70
VAV/Zone Status
Airfl ow.........73
Alarm Status.........73
Box Air Temperature.........72
Cooling Setpoints.........72
Desired CFM.........73
Fan Status.........73
Heating/Cooling Demand.........72
Heating Setpoints.........72
Mode of Operation.........72
Reheat Stages.........73
Screens.........72
Slide Offset.........72
Supply Air Temperature.........72
Zone Damper Position.........73
Zone Temperature.........72
VCM-X Controller
Alarm Conditions.........64
Analog Output Override.........77
Building Pressure Output %.........60
Bypass Damper Signal.........64
Coil Temperature.........58
Confi guration Screens.........25
Cooling.........56
Damper Force Modes.........74
Date.........11
,
17
Dewpoint Temp.........58
Economizer.........56
Economizer Overrides.........77
Exhaust VFD Override.........78
Heating.........56
Holidays.........14
Holiday Start/Stop Times.........15
,
23
Indoor RH Setpoint.........59
Leaving Water Temperature.........57
MHGRV Output %.........60
Mod Cooling %.........60
,
63
Mod Cooling Override.........78
Mode.........56
Mode Cooling Setpoint.........56
Mode Enable Temperature.........56
Mode Heating Setpoint.........56
MODGAS Output %.........60
Mod Heating %.........60
Mod Heating Override.........78
OA Dewpoint.........58
Occupied Mode.........15
, 23
Outdoor Air Relative Humidity.........58
Outdoor Air Temperature.........58
Outputs Force.........77
RA Bypass Override.........78
RA Damper Override.........78
Relay Overrides.........77
Return Air Damper Signal.........64
Schedule Override.........15
,
23
Scheduling.........14
,
22
Space Temperature Return Air and
Slide Adjust.........57
Static Pressure Output %.........59
Supply Air Temperature &
Setpoint.........57
Supply Fan Relay.........64
Supply VFD Override.........77
Time & Date.........11
, 17
Unoccupied Mode.........15 , 23
Week Schedules.........14 , 22
VCM-X Modular
Controller.........29
,
61
,
62
,
63
VCM-X Schedule Holidays.........14
,
22
VCM-X WSHP Controller.........61 , 62
VFD.........25 , 35
VFD Full.........38
VFD Half.........38
Voltage
Maximum for Main Fan.........32
,
42
Voting Zone Confi guration.........66
W
Warm-up Mode Relay.........64
Warm-up Mode Relay
Confi guration.........33
,
43
Water Source Heat Module
Coil Temperature Status.........61
Signal Status.........63
Water Source Heat Pump.........61
Water Source Heat Pump Installed
Screen.........38
Week Schedules
VCM-X Controller.........14 , 22
Wetbulb Temperature.........59
Wiring
Power/Comm Board.........8
WSHP Protection Module Screen.........29
Y
Year.........11 , 17
Z
Zone Alarm
Delay.........70
Offsets.........70
Zone Damper Position
VAV/Zone Status.........73
Zone Temperature
VAV/Zone Status.........72