Gasboy Islander PLUS - Manual (Page 90)

3-9.4. RS-485 Electronic Pump
The wiring for the RS-485 electronic pump is provided as follows:
• Figure 3-26 shows the specific wiring connections between OrIC and the RS-485
pump nozzle, and the terminals that differ from the Mechanical Pump. The figure
shows the prallel connection between two RS-485 pumps and the Terminal Block.
• Figure 3-23 shows the wiring list for connection to the Terminal, as published in the
Wiring Label added to the inner door. The Wiring Label follows the physical
location of the wires in the Terminal Block, as shown in Figure 3-14.
Figure 3-26 RS-485 Electronic Pump - Wiring Diagram
Islander PLUS Manual 76