Gasboy Islander PLUS - Manual (Page 121)

Table 5-3. Printer Troubleshooting (Cont'd)
Fault Probable Cause Checks Corrective Action
No communication to Printer (Continued)
Incorrect Address
settings Check printer address
jumpers (no Jumper
means address is 70HEX) Set the correct Hex address
in SiteOmat
Faulty Printer Replace Printer
Paper is not automatically cut
Paper is not being
cut at the end of
the printing Incorrect SiteOmat
setting Check SiteOmat printing
settings Set SiteOmat printing
settings accordingly
Faulty Printer cutter Replace Printer cutter
Faulty Printer Replace Printer
Islander PLUS Manual 107