Gasboy Islander PLUS - Manual (Page 141)

INSTALLATION INSTRUCTIONS
CAUTION
Only a technician authorized to work on Orpak's
pedestals can perform HID installation.
The technician must work in accordance with the
instruction provided in the Islander PLUS
installation manual MDE-4811.
1. In cases where installing the HID unit in Islander PLUS 8-hoses pedestals, remove the OrCU
module from the internal side of the pedestal door (see Figure 3) as follows:
a. Unscrew four 4X10 screws and washers securing the OrCU module to the holder
b. Remove the OrCU holder by unscrewing three M3 flat screws and spacers
Figure 3. OrCU Location in Islander PLUS 8-Hoses
Islander PLUS Manual 127