Gasboy MCE300 User Manual

Page 16

Text mode
Original mode

Communicating with the MCE 300

03/07/03

3-5

E - EXIT COMMAND MODE

If you are currently in the command mode, by entering the E command the system exits the
command mode. Access is not allowed to the system until the correct security access code is
entered.

To exit the command mode:

At an asterisk (*) prompt -

1.

Enter the E command

You will be prompted : SIGN ON

The unit will wait for the proper code or the entry of a code card.

Example: Exit Command

Â
AÂ
UECPÂQP0ÂÂÂ
Â

Turning off the power to the MCE 300 will also cause the unit to exit the command mode and the
security code must be entered when the unit is turned on.