Fluke Biomedical VT Plus HF - Manual (Page 94)

VT Plus HF
Operators Manual
4-10
Single Plot Screen
The Single Plot screen, shown in Figure 4-5, allows observation of one of the signals.
fec087.bmp
Figure 4-5. Single Plot Screen
The plot can be configured to display any of the signals, (flow, volume, airway pressure,
low pressure, high pressure, and oxygen). This plot can be set to auto-scale or it can be
manually re-scaled to the user's desired range of values.
On the right hand side of the screen, the statistics for the selected signal are displayed.
These statistics show the min, max, average and current value for the signal that is
currently displayed. For more information on configuring plots, refer to Signal Selection,
Automatic Rescaling, and Manual Re-scaling.