Fluke Biomedical VT Plus HF - Manual (Page 42)

VT Plus HF
Operators Manual
2-14
4. Press the ENTER soft key to save the change or the ESCAPE soft key to cancel the
change.
5. Press the BACK soft key to return to the Settings menu.
Note
For hour and minute values less than 10, enter a leading zero. For
example, if the time is 9:05, enter 0905.
Date
The Analyzer displays the date with MM as the month, DD as the date, and YYYY as the
year.
To enter the date:
1. Highlight
Date .
2. Press the MODIFY soft key to display the value field.
3. Input the desired value from the keypad. Enter the date with MM the number
between 1 and 12, corresponding to the month; DD the number between 1 and 31,
corresponding to the day of the month; and YYYY the year. See Date Format,
below.
Note
For values of month and date less than 10, enter a leading zero. For
example, if the month is February, enter 02.
4. Press the ENTER soft key to save the change or the ESCAPE soft key to cancel the
change.
5. Press the BACK soft key to return to the Settings menu.
Date Format
The Analyzer has two date formats as shown below: MM/DD/YYYY and
DD/MM/YYYY
To change the format:
1. Highlight
Date Format .
2. Press the MODIFY soft key to toggle to the desired value.
3. Press the ENTER soft key to save the change or the ESCAPE soft key to cancel the
change.
4. Press the BACK soft key to return to the Settings menu.
Demo Data
This setting allows the user to show recorded data on screen without needing to connect
the Analyzer to a ventilator or do any measurements. The word DEMO appears on the
menu bar when this mode is engaged. The recorded data is for demonstration purposes.
To select the demo data function:
1. Highlight
Demo Data .
2. Press the MODIFY soft key to toggle to the desired value.