Fluke Biomedical VT Plus HF - Manual (Page 116)

VT Plus HF
Operators Manual
4-32
fec116.bmp
2. Enter changes as desired.
3. If necessary, click the
Advanced button. The Gas Settings Date Entry dialog
box displays.
fec117.bmp
4. Make appropriate entries to adjust temperature, viscosity, molecular weight, and
relative humidity for both inhaled and exhaled gases. Ambient temperature can be
adjusted, and the flow can be adjusted to one of six standard modes (ATP, BTPS,
STPD), as shown below:
5. If the viscosity or molecular weight of the gas being used is unknown, click the Gas
Calculator button. The Gas Calculator dialog box displays: