Fluke Biomedical VT Plus HF - Manual (Page 89)

Remote Operation
Overview of VT for Windows PC Software
4
4-5
Finally, if the communication port for the Analyzer must be manually set or changed,
start VT for Windows PC software and select Communications > Comm Port from
the pull down menu. Select the appropriate communication port. Communications are
established when the software displays waveforms and the displayed values for flow and
pressure are changing.
Overview of VT for Windows PC Software
VT for Windows PC software provides a simple interface for recording and playing back
data calculated by the Analyzer. The software provides most Analyzer functions on a
simple interface for recording and playing back data calculated by the Analyzer. Figure
4-1 shows the VT for Windows PC software interface, and Table 4-1 identifies its
essential elements.
1
2
3
4
6
5
7 8 9 10
fec086.eps
Figure 4-1. VT for Windows PC software Interface