Fluke Biomedical VT Plus HF - Manual (Page 69)

Operation
Monitor Screen
3
3-19
Monitor Screen
The Monitor screen shows three signals and their corresponding values.
fec056.bmp
Alternatively, the lower signal can be replaced by a set of four breath parameters. The
user can select which signals are displayed on the monitor screen.
Select Press
the SELECT soft key to change the position of the plot that can be
altered using the ASSIGN and UNITS soft keys. The vertical cursor bar
on the right side of the display moves, indicating the plot area selected.
Assign Press the ASSIGN soft key to change which signal is plotted in the
selected position. Four breath parameters can be displayed in place of a
signal plot in the lowest position. The user can select the parameters
displayed in this screen.
Units Press the UNITS soft key to change the units of the signal and the units of
the instantaneous value for the plot in the selected position. The possible
units for each of the various signals are the same as the units that can be
displayed in the screens that display that signal exclusively.
Re-scale Press the RESCALE soft key to change the scale on the plot of data to a
more appropriate window of values.