Fluke Biomedical VT Plus HF - Manual (Page 45)

Connection and Setup
Setting Analyzer Operating Parameters
2
2-17
Graphics
To choose the format of reports shown:
1. Highlight
Graphics and press the MODIFY soft key to toggle between Graphics
or Text Only .
2. Press the ENTER soft key to save the change or the ESCAPE soft key to cancel the
change.
3. Press the BACK soft key to return to the Settings menu.
Audio Levels
This setting adjusts the level of sound for the functions of the Analyzer.
To adjust the sound, highlight
Audio Levels . The Audio Levels screen appears:
fec034.bmp
General
To adjust the general audio level:
1. Highlight
General and press the MODIFY soft key to toggle between Low , High ,
or Off .
2. Press the ENTER soft key to save the change or the ESCAPE soft key to cancel the
change.
3. Press the BACK soft key to return to the Settings menu.
Keypad
When keypad buttons are pushed, a beep signals this action. This option adjusts the sound
level of that beep.
To adjust the sound level of the keypad:
1. Highlight
Keypad and press the MODIFY soft key to toggle between Low , High ,
or Off .
2. Press the ENTER soft key to save the change or the ESCAPE soft key to cancel the
change.
3. Press the BACK soft key to return to the Settings menu.