Report printing, Operating system loading – Fluke Biomedical VT Plus HF User Manual
Page 111
Remote Operation
Report Printing
4
4-27
Report Printing
Reports can be printed from VT for Windows software to any printer installed on a
computer. There are two ways to print from VT for Windows:
•
Select
from the File menu to display the system print dialog box. This allows
the user to select which printer to use and adjust settings on that printer. Click
OK
to
send the report to the printer.
•
Click the
button on the tool bar. The report is automatically sent to the default
system printer. No print dialog displays.
The print header at the top of the reports is stored in the Analyzer. It is loaded into VT for
Windows every time it connects to a Analyzer unit. The print header can be changed
using the
Print Header
function in the
Setup
menu.
Operating System Loading
VT for Windows can be used as a utility to load new versions of the Analyzer operating
system software into the flash memory of the Analyzer. Contact the Fluke Biomedical
Service Center for Analyzer software updates.
Note
Using VT for Windows as a utility to load new versions of Analyzer
software overwrites any user settings stored in the Analyzer, but it does not
change the calibration of the Analyzer.
To load new Analyzer operating system software:
1. Select
File
then
Load Flash
from the menu. The Analyzer operating software is
stored on two layers: (1) flash (code file) operating code and (2) text.
2. Click the
Browse
button to point to the file FLASH.hex as the code file and to the
file VP-TEXT.hex as the text file.
3. Click
OK
to begin downloading.
When communications are established, the Analyzer splash screen displays, and a
Loading Flash
dialog appears on VT for Windows with a status bar.
When the download is complete, the Analyzer returns to the default screen. The
download version can be verified by going to the information screen on the Analyzer.