Fluke Biomedical VT Plus HF - Manual (Page 35)

Connection and Setup
Using the Setup Screen
2
2-7
Using the Setup Screen
To use the Setup screen:
1. Press the SETUP/8 key. The Setup screen displays:
fec027.bmp
The options are:
• Settings – a menu for choosing options that affect flow and measurement on the
Analyzer
• System – a menu for choosing options that affect how information on the
Analyzer is set up such as time and date
• Utility – used for system service and calibration only
• Information – product information about the Analyzer, such as serial number
and copyright
2. Use the S and T soft keys to highlight an option.
3. Press the
ENTER soft key to select the option.
4. Press the BACK soft key to return to the previous menu.
Setting Testing Parameters
To adjust the settings:
1. From the
Setup screen, highlight Settings and press the ENTER soft key. The
Settings menu displays.
2. Change settings to pre-selected options or to numeric values by highlighting the
option and pressing the MODIFY soft key.
For example, if one selects Correction Mode then presses MODIFY , he can scroll
through the available Correction Mode options. If one selects an option that requires
a numeric entry, such as BD Threshold and press MODIFY , the entered data is
cleared, and the field can accept numeric input from the keypad until the ENTER key
is pressed.