Flowserve 3400IQ Digital Positioner - Manual (Page 65)

Logix 3400IQ Digital Positioner FCD LGENIM3402-00 – 0/07
flowserve.com
Table 8.13 Transducer Block Parameter Summary
Parameter
Mnemonic Obj Type Data Type Use/Model Store Size Valid Range Initial Value Units Perm Mode Other Range
Check
VALVE_MODEL_NO S Visible
String
C/Contained S 32 NULL
VALVE_SN S Visible
String
C/Contained S 32 NULL
VALVE_TYPE S Unsigned8 C/Contained S 1 enum. Note 5
XD_CAL_LOC S Visible
String
C/Contained S 32 NULL
XD_CAL_DATE S Visible
String
C/Contained S 8 NULL
XD_CAL_WHO S Visible
String
C/Contained S 32 NULL
Manufacturer
Specific Parameters
DAC_PERCENT S float C/Contained D 4 0-100 Read-only
Note 1
CONTROL_FLAGS S Bit String C/Contained N 1 enum. Note 4 O/S Note 3
GAIN_UPPER S float C/Contained S 4 2 O/S Note 3
GAIN_LOWER S float C/Contained S 4 1 O/S Note 3
GAIN_MULT S float C/Contained S 4 0.05 O/S Note 3
IGAIN S Integer16 C/Contained S 2 10 O/S Note 3
IL_OFFSET S float C/Contained S 4 55 O/S Note 3
STATUS_FLAGS S Bit String C/Contained N 1 enum. 0 Read-only
CMD_USED S float C/Contained D 4 -10 to 110 Read-only
CALIBRATE S Unsigned8 C/Contained D 1 enum. Normal
Operation
O/S Note 3
DAC_VALUE S Unsigned16 C/Contained D 2 0 - 4095 O/S Note 2, 3
PRESS_CAL S float C/Contained S 4 60 Note 3
CALIBRATE_FLAGS S Bit String C/Contained D 1 enum. Read-only
SOFTSTOP_HIGH S float C/Contained S 4 -10 to 110 110 O/S Note 3
SOFTSTOP_LOW S float C/Contained S 4 -10 to 110 -10 O/S Note 3
CYCLE_COUNTER S Unsigned32 C/Contained N 4 0
– 4.29x109
0 Note 3
CYCLE_DEADBAND S float C/Contained S 4 .10 – 100 20 Note 3
CYCLE_LIMIT S Unsigned32 C/Contained S 4 0
– 4.29x109
4294967294 Note 3
TRAVEL_ENG S float C/Contained S 4 0
– 4.29x109
0 Note 3
TRAVEL_
DEADBAND
S float C/Contained S 4 .10 – 100 20 Note 3
TRAVEL_ALERT S float C/Contained S 4 0
– 4.29x109
2e+006
Note 3
STROKE_ENG S float C/Contained S 4 0
– 4.29x109
1 Note 3
TRAVEL_UNITS S Unsigned8 C/Contained S 1 0
– 4.29x109
inches Note 3