Logix 3400iq digital positioner description – Flowserve 3400IQ Digital Positioner User Manual
Page 13

3
Logix 3400IQ Digital Positioner FCD LGENIM3402-00 – 0/07
flowserve.com
1
Logix 3400IQ Digital Positioner
Description
1.1 Introduction
About this Section
This	section	is	intended	for	users	who	have	never	worked	with	the	Logix	3400IQ	digital	positioner	
fieldbus	positioner	interface.	It	provides	some	general	information	to	acquaint	the	user	with	the	Logix	
3400IQ	digital	positioner.
								 CAUTION:	Flowserve	recommends	NI-FBUS	Configurator	software	that	runs	on	a	variety															
of	Personal	Computer	(PC)	platforms	using	Windows	NT
™
or Windows XP
™
. It is a bundled Windows
software	and	PC-interface	hardware	solution	that	allows	quick,	error-free	configuration	and	diagnosis	
of	Valtek	control	products	with	FOUNDATION	fieldbus	communications.	The	NI-FBUS	Configurator	
allows	users	to	communicate	with	the	Logix	3400IQ	digital	positioner	from	a	remote	location	to:
Configure the Logix 3400IQ digital positioner by selecting and setting operating parameters.
Access	diagnostic	information	to	identify	configuration,	communication,	Logix	3400IQ	digital	
positioner	or	process	problems.
Calibrate Logix 3400IQ digital positioner.
Request and display Logix 3400IQ digital positioner data.
Configure the Fieldbus network.
NI-FBUS	Configurator	(version	2.36	or	higher)	is	compatible	with	the	latest	Logix	3400IQ	digital	
positioner.	Please	contact	a	Flowserve	representative	for	more	information.
1.2 Fieldbus Logix 3400IQ Digital Positioner
About the Logix 3400IQ Digital Positioner
The	Logix	3400IQ	digital	positioner	is	furnished	with	FOUNDATION	fieldbus	interface	to	operate	in	a	
compatible	distributed	fieldbus	system.	See	Section	1.4	for	an	overview	of	fieldbus.	
The	Logix	3400IQ	digital	positioner	includes	FOUNDATION	fieldbus	electronics	for	operating	in	
a	31.25	kbit/s	fieldbus	network.	It	features	standard	fieldbus	function	blocks	with	manufacturer-	
specific	additions	for	enhanced	operation.	This	Logix	3400IQ	digital	positioner	is	a	Link	Master	
device,	which	means	it	can	function	as	the	backup	Link	Active	Scheduler	in	a	fieldbus	network.	
•
•
•
•
•
