Flowserve 3400IQ Digital Positioner - Manual (Page 5)

Logix 3400IQ Digital Positioner FCD LGENIM3402-00 – 0/07
flowserve.com
Copyright, Notices and Trademarks
While this information is presented in good faith and believed to be accurate, Flowserve disclaims
the implied warranties of merchantability and fitness for a particular purpose and makes no express
warranties except as may be stated in its written agreement with and for its customer.
In no event is Flowserve liable to anyone for any indirect, special or consequential damages. The
information and specifications in this document are subject to change without notice.
Logix™ 3400IQ digital positioner is a trademark of Flowserve Corporation.
TotalPlant, TDC 3000, SFC, Smartline and ST 3000 are U.S. registered trademarks of Honeywell Inc.
FOUNDATION™ fieldbus is a trademark of the Fieldbus Foundation.
Information Mapping is a trademark of Information Mapping Inc.
Windows® is a registered trademark of Microsoft Corporation.
Windows NT™ is a trademark of Microsoft Corporation.
NI-FBUS Configurator™ is a trademark of National Instruments.
About This Publication
This manual is intended as a ‘how to’ reference for installing, wiring, configuring, starting up, and
operating the Valtek Logix 3400IQ digital positioner with FOUNDATION fieldbus (FF).
This manual provides detailed information for installation and operation to assist first-time Logix
3400IQ digital positioner users.
This manual is written as the technical guide for the experienced fieldbus user. It does not contain
information on fieldbus communications and usage. It is recommended that a user new to fieldbus
attend the training courses that are taught by the Fieldbus Foundation to obtain the background
knowledge that is needed to operate a fieldbus segment.
Refer to Contacting the Fieldbus Foundation on page 9.
About This Manual
This manual provides installation, operation, maintenance for the Logix 3400IQ digital positioner with
FOUNDATION fieldbus communications. Reference information is also provided.
The sections of information contained in the manual follow this order:
• Background and pre-installation
• Logix 3400IQ digital positioner mechanical and electrical installation
• Logix 3400IQ digital positioner configuration
• Operation
• Reference information