Flowserve 3400IQ Digital Positioner - Manual (Page 127)

27
Logix 3400IQ Digital Positioner FCD LGENIM3402-00 – 0/07
flowserve.com
Appendix A: Sample Configuration Record
Sample Device Configuration
The following pages provide a printout example of the Function Block Application portion of a Logix
3400IQ digital positioner device configuration file. The printout was generated using the NI-FBUS
Configurator application and shows function block parameters and values for a typical control loop.
The printout is shown at the left side of the page. Comments and notes on the configuration are given
on the left-hand side.
All parameters, including read-only parameters, are included for completeness.
Table 11.1 Logix 1400-011 : RS-011 (RB)
Configuration File Data Comments
(1) ST_REV = 0x0000 Device tag : Block tag name Block
tagname (Resource block) (index)
Parameter mnemonic = value
(2) TAG_DESC =
(3) STRATEGY = 0x0000
(4) ALERT_KEY = 0x00
(5) MODE_BLK =
TARGET = Auto
ACTUAL = Auto
PERMITTED = Auto | OOS
NORMAL = Auto
(6) BLOCK_ERR = 0x0000
(7) RS_STATE = Online
(8) TEST_RW =
VALUE_1 = FALSE
VALUE_2 = 0x00
VALUE_3 = 0x0000
VALUE_4 = 0x00000000
VALUE_5 = 0x00
VALUE_6 = 0x0000
VALUE_7 = 0x00000000
VALUE_8 = 0
VALUE_9 = (NULL)
VALUE_10 = (NULL)
VALUE_11 = 01/01/00 00:00:00 (MM/DD/YY HH:MM:SS)
VALUE_12 = 01/01/84 00:00:00 (MM/DD/YY HH:MM:SS)
VALUE_13 = 0:00:00:00 (DD:HH:MM:SS)
VALUE_14 = 0x0000
VALUE_15 = 01/01/72 00:00:00 (MM/DD/YY HH:MM:SS)
(9) DD_RESOURCE = (NULL)
(10) MANUFAC_ID = 0x00464c53
(11) DEV_TYPE = 0x0202
(12) DEV_REV = 0x06
(13) DD_REV = 0x01