Comtech EF Data MBT-5000 - Manual (Page 74)

MBT-5000 L-Band Up/Down Converter System MN-MBT5000
Front Panel Operation Revision 4
5–18
5.2.5 SELECT: Utility Menu Branch
UTILITY: Date/Time CID
Display Firmware LNA
Use the ◄ ► arrow keys to select from the submenu choices shown, and then press ENTER.
The submenus available from the SELECT: Utility menu branch are as follows:
Submenu Sect Function
Date/Time 5.2.5.1 Edits the Real-Time Clock time and date settings
CID 5.2.5.2 Edits the 24-character Circuit ID string.
Display 5.2.5.3 Adjusts the brightness level of the Vacuum Fluorescent Display (VFD).
Firmware 5.2.5.4
Displays the installed internal firmware and permits user the boot using a selected
firmware image.
LNA 5.2.5.5
Permits control of any LNAs (Low-Noise Amplifiers) configured for use with the
MBT-5000.
5.2.5.1 UTILITY: Date/Time (Set Real-time Clock)
Edit Real-Time Clock:
12:00:00 04/24/14(◄ ►▲▼ E)
To edit the time and date settings for the real-time clock, use the ◄ ► arrow keys to first select
the digit to edit, and then use the ▼▲ arrow keys to edit the value of that digit.
The time is set in 24-hour military format (HH:MM:SS). The date is set in MM/DD/YY format.
Press ENTER when done.
5.2.5.2 UTILITY: CID (Circuit ID)
Edit Circuit ID:
24 CHARACTER TST MESSAGE
The Circuit ID is a user-configurable unit label. On the bottom line, use the ◄ ► arrow keys to
first select the character to edit, and then use the ▼▲ arrow keys to edit that character. Press
ENTER when done.
A maximum of 24 characters are available, as follows:
[Space] ( ) * + - , . / 0-9 and A-Z.
Press ENTER once you compose the string – the MBT-5000 removes all trailing spaces from the
string upon entry.