Comtech EF Data MBT-5000 - Manual (Page 101)

MBT-5000 L-Band Up/Down Converter System MN-MBT5000
Ethernet-based Remote Product Management Revision 4
6–23
• Valid Conv A/ConvB Forward RF Power readings are provided only if the pertinent
MBT-5000 up converter (BUC) is optionally configured with the Power Monitor feature.
These parameters otherwise will display as N/A if the pertinent converter is a BDC.
• Valid Power Supply 2 and Local Switch Position information is provided with redundant
configurations only.
Firmware Information
This scrollable window identifies the Bootrom, Bulk Image#1 and Bulk Image #2.
Base Unit Part Number
The part number for the MBT-5000 chassis (i.e., the “base unit”) is identified here.
Converter A or B Part Number Type
These scrollable Part Number windows identify the part numbers for the converter modules
installed in the ‘A’ and ‘B’ slots.
Converter A or B Equipment Type
The scrollable Equipmen Type windows identify the function of each module slot (BUC or BDC)
along with the associated RF conversion band and frequencies.