Comtech EF Data MBT-5000 - Manual (Page 44)

MBT-5000 L-Band Up/Down Converter System MN-MBT5000
Rear Panel Connections Revision 4
3–12
o
Use the slot to pry the holder outward from the IEC power module.
o
Pull the holder straight out, and then swing the holder away from the module.
• Then, remove and replace the fuses as needed.
o
Use T2.0A (2 Amp) fuses for standard operation.
• Finally, re-seat the fuse holder in the IEC power module.
3.3.2.2 Optional Dual Entry Module Alternating Current (AC) Power
Interface (Redundancy Units Only)
Figure 3-8. MBT-5000 Optional Dual Entry Module AC Power Interface