Comtech EF Data MBT-5000 - Manual (Page 125)

MBT-5000 L-Band Up/Down Converter System MN-MBT5000
Serial-based Remote Product Management Revision 4
7–23
Parameter
Type
Command
(Instruction
Code and
Qualifier)
Arguments for
Command or
Response to
Query
Description of arguments
(Note that all arguments are ASCII numeric codes between 48 and 57)
Response to
Command
(Target to
Controller)
Query
(Instruction
Code and
Qualifier)
Response to query
(Target to
Controller)
Retrieve
Maintenance
Status (cont.)
Notes:
1) If the converter does not support power monitor, will display FWPWR=xxx.x.
2) If the converter does not have LNS current supply, will display LNACS=xxx.x
Serial Number N/A 9 bytes Query only.
Queries the unit 9-digit serial number. Unit returns its S/N in the form xxxxxxxxx.
Example: SNO=176500143
N/A SNO? SNO=xxxxxxxxx
(See Description of
Arguments)
Temperature N/A 4 bytes Query Only.
Returns the temperatures of the heat sink in the form a sign byte followed by 3 bytes for the
temperature.
Example: TMP=+26.0
N/A TMP? TMP=sxxx
(See Description of
Arguments)