Comtech EF Data MBT-5000 - Manual (Page 56)

MBT-5000 L-Band Up/Down Converter System MN-MBT5000
Upgrading Firmware Revision 4
4–10
B. Using the MBT-5000 HTTP Interface ‘Config | Utility’ page: Click [Reboot Now] to soft
reboot the converter.
C.
Upon reboot, the converter front panel “splash” screen should verify that the new
firmware version is active, as shown in this example:
MBT-5000
Version: #.#.# SN #######
6) To load the second Firmware Image, use the converter front panel or the MBT-5000 HTTP
Interface ‘Config | Utility’ page to configure the target Image (1 or 2) as the Current Active
Firmware Image, and then repeat Steps 2 through 5.
The MBT-5000 is now operating with its latest firmware. The firmware update process is now
complete.