Comtech EF Data MBT-5000 - Manual (Page 64)

MBT-5000 L-Band Up/Down Converter System MN-MBT5000
Front Panel Operation Revision 4
5–8
Ethernet Config: MAC
M&C Port MAC Address:
00-06-B0-00-01-06
This read-only menu shows the unit MAC address. Once the MAC address has been noted,
press ENTER or CLEAR to exit this menu.
Ethernet: SNMP
SNMP:
Community Traps (◄ ► E)
Use the ◄ ► arrow keys to select the parameter to configure: Community or Traps.
SNMP: Community
SNMP Community: Read
Write Trap (◄ ► E)
Use the ◄ ► arrows keys to select Read, Write, or Trap, and then press ENTER.
SNMP: Community  Read
Read Community: (◄ ► ▲▼ E)
public
SNMP: Community  Write
Write Community:(◄ ► ▲▼ E)
private
SNMP: Community
 Trap
Trap Community:(◄ ► ▲ ▼ E)
comtech
To edit the SNMP Read, Write, or Trap Community strings: First, use the ◄ ► arrow
keys to select a character to edit, and then use the ▲▼arrow keys to edit that
character. Note that only the first 20 characters on the bottom line are available.
All printable ASCII characters are available with the exception of the backslash ‘/’
(ASCII code 92) and tilde ‘~’ (ASCII code 126).
Press ENTER once you compose the string – the MBT-5000 removes all trailing spaces
from the string upon entry.