Denon AVR-5805CI - Manual (Page 93)

93
Advanced Operation
ZONE2 SELECT
ZONE3/4/REC SELECT FUNCTION
1 Press the ZONE2 SELECT button to display the
“ZONE2 SOURCE” on the display.
2 Turn the FUNCTION knob to select the source
you want to output appears on the display.
3 Start playing the source to be output.
For operating instructions, refer to the manuals of the
respective components.
• The signals of the source selected in the ZONE3 mode are
also output from the VCR-1, VCR-2, VCR-3, VCR-4 and
CDR/TAPE recording output terminals.
• Digital signals are not output from the ZONE3 and ZONE4
audio output terminals.
• About the MULTI ZONE connections ( page 88 ~ 92).
Outputting a program source to an
amplifier, etc., in a ZONE2 room
(ZONE2 SELECT mode)
1 Press the ZONE3/4/REC SELECT button to
display the “ZONE3 (ZONE4) SOURCE” on
the display.
• If the “ZONE3 SOURCE” is selected, the MULTI
indicator light.
The display switches as follows each time the button
is pressed.
2 Turn the FUNCTION knob to select the source
you want to output appears on the display.
ZONE4
ZONE3
(REC OUT)
3 Start playing the source to be output.
For operating instructions, refer to the manuals of the
respective components.
Outputting a program source to an
amplifier, etc., in a ZONE3 or ZONE4 room
(ZONE3, ZONE4 SELECT mode)