Denon AVR-5805CI - Manual (Page 152)

152
Advanced Setup – Part 2
10 Press the CURSOR D D or H H button to select
“Exit”, then press the ENTER button.
• The “Auto Setup / Room EQ” menu reappears.
11 Press the CURSOR D D or H H button to select
“Exit”, then press the ENTER button.
• The “System Setup Menu” reappears.
5
Press the CURSOR D D or H H button to select the
Equalizer curve, then press the ENTER button.
• The “EQ Check” screen appears.
The display is only an approximate picture of the
response and that correction is happening at all
frequencies.
6 Press the CURSOR F F or G G button to select the
speaker channel.
7 If the check ends, press the CURSOR D D or H H
button to select “Exit”, then press the ENTER
button.
• The “EQ Parameter Check” screen reappears.
8 Press the CURSOR D D or H H button to select
“Exit”, then press the ENTER button.
• The “Parameter Check” screen reappears.
The results of the “Auto Setup” procedure can
be reset even if the settings have been changed
after performing the “Auto Setup” procedure:
Press the
CURSOR D D or H H button to select
“Restore Yes 0”, then press the CURSOR F F
button.
9