Denon AVR-5805CI - Manual (Page 146)

146
Advanced Setup – Part 2
• Please set all THX Certified speakers to small and the
crossover to 80 Hz.
• We recommend using with the crossover frequency set to
“FIXED–THX–”, but depending on the speaker, setting it to a
different frequency may improve frequency response near
the crossover frequency.
• The crossover frequency mode is valid only when subwoofer
is set to “Yes”, and when one or more speakers are set to
SMALL, as described in section “Speaker Configuration”
settings (
page 140, 141).
1 Press the CURSOR F F or G G button to select
“Advanced” at the “Crossover Frequency”
screen.
2 Press the CURSOR D D or H H button to select the
speaker to be set.
• If “LFE–THX–” is selected at “Subwoofer Setup”, the
frequencies can only be selected for speakers set to “Small”
at “Speaker Configuration”.
• If “LFE+Main” is set at “Subwoofer Setup”, the frequencies
can be selected regardless of the speaker size setting.
Selecting the Surround Speakers for the
different surround modes
• Use this function when using multiple surround speaker
combinations for more ideal surround sound.
• Once the combinations of surround speakers to be used for
the different surround modes are preset, the surround
speakers are selected automatically according to the
surround mode.
1 Press the CURSOR D D or H H button to select
“Surround Sp Setup” at the “Speaker Setup”
menu, then press the
ENTER button.
• The “Surround Sp Setup” screen appears.
• If “LFE+Main” is set at “Subwoofer Setup”, “SW:LFE+Main”
( page 141, 142) is displayed at the top right of the screen.
3 Press the CURSOR F F or G G button to select the
frequency.
2 Setting the crossover frequency individually for
the different channels