Denon AVR-5805CI - Manual (Page 111)

111
Advanced Setup – Part 1
Video Setup
• Make the video-related settings.
Setting the HDMI/DVI In Assignment
• The HDMI or DVI-D input terminals are assigned for the
different input sources.
Select HDMI or DVI-D for the monitor output terminal.
Select the HDMI audio signal playback method.
2 Press the CURSOR D D or H H button to select
“HDMI/DVI In Assign”, then press the ENTER
button.
• The “HDMI/DVI In Assign” screen appears.
3
Press the CURSOR D D or H H button to select the
input source, then press the CURSOR F F or G G
button to select the input terminal.
Select from among HDMI 1 to 5 and DVI-D.
If the same HDMI or DVI-D input terminal is selected,
the setting for the input source that was previously
assigned switches to “NONE”.
5
Press the CURSOR D D or H H button to select
“Audio”, then press the CURSOR F F or G G button
to select the method for playing the audio
signals included in the HDMI input signal.
AMP:
Play the audio signals on speakers connected to
the AVR-5805CI.
TV:
Play the audio signals on a TV connected to the
AVR-5805CI.
6
Press the CURSOR D D or H H button to select the
input (1 to 5), then press the CURSOR F F or G G
button to select the analog input terminal
(EXT. IN or ANALOG).
If there is no HDMI audio signal or the audio signal of
HDMI can not be reproduced, the signal automatically
switches to the input from the set terminal.
1~5 correspond to each HDMI 1~5 input terminal.
1 Press the CURSOR D D or H H button to select
“Video Setup” at the “System Setup Menu”,
then press the
ENTER button.
• The “Video Setup” menu appears.
This setting can be switched directly using the
MONITOR SELECT button on the main unit.
4 Press the CURSOR D D or H H button to select
“Monitor”, then press the CURSOR F F or G G
button to select the monitor output terminal.