Denon AVR-5805CI - Manual (Page 58)

58
Basic Operation
7 Press the ENTER or SURROUND PARAMETER
button to complete the setting.
6 Press the CURSOR F F or G G button to adjust the
parameters setting.
• Select “Default Yes” and press CURSOR F F button to reset all
the settings.
• When playing PCM digital signals or analog signals in the
DOLBY PRO LOGIC II , DOLBY PRO LOGIC II x, DTS NEO:6
modes and the input signal switches to a digital signal
encoded in Dolby Digital, the Dolby Surround mode switches
automatically. When the input signal switches to a DTS
signal, the mode automatically switches to DTS Surround.
• The DTS NEO:6 Cinema or Music mode can be chosen
directly by pressing the CINEMA or MUSIC button on the
Remote control unit during playback in the DTS NEO:6 mode.
DTS NEO:6 mode
• Surround playback can be performed for the analog input and
digital input 2 channel signals.
1 Press the STANDARD button to select “DTS
NEO:6” mode.
• The DTS NEO:6 indicator lights.
The mode switches as shown
below each time the STANDARD
button is pressed.
lights
DTS NEO:6 DOLBY PL II x
2 Play a program source.
3 Press the SURROUND PARAMETER button.
• The surround parameter menu appears.
4 Press the CURSOR F F or G G button to select the
play mode.
SURROUND PARAMETER
CINEMA STANDARD
ENTER PHONES CURSOR MUSIC
CURSOR
SURROUND
PARAMETER
ENTER
STANDARD
MUSIC
USER MODE
CINEMA
5 Press the CURSOR D D or H H button to select the
various surround parameters.
2 Surround parameters t
DTS NEO:6 Mode:
• Cinema:
This mode is optimum for playing movies. Decoding is
performed with emphasis on separation performance to
achieve the same atmosphere with 2 channel sources as
with 6.1 channel sources.
This mode is effective for playing sources recorded in
conventional surround formats as well, because the in-phase
component is assigned mainly to the center channel (C) and
the reversed phase component to the surround (SL, SR and
SB channels).
• Music:
This mode is suited mainly for playing music. The front
channel (FL and FR) signals bypass the decoder and are
played directly so there is no loss of sound quality, and the
effect of the surround signals output from the center (C) and
surround (SL, SR and SB) channels add a natural sense of
expansion to the sound field.
CENTER IMAGE (0.0 to 1.0: default 0.3):
The center image parameter for adjusting the expansion of the
center channel in the DTS NEO:6 MUSIC mode has been added.
USER MODE