Setting the power amplifier assignment – Denon AVR-5805CI User Manual

Page 129

129

Advanced Setup – Part 1

Setting the Power Amplifier Assignment

• With the AVR-5805CI’s 10-channel power amplifier, it is possible to select 10 channels worth of signals (not including the

subwoofer signals output from the pre-out terminals) to be output from the speakers. This makes it possible to put together
various speaker systems. The channels can be selected freely, so “L1” to “L5” and “R1” to “R5” are indicated on the speaker
terminals on the AVR-5805CI’s rear panel.

• The channels for which the power amplifier can be assigned differ according to the channel settings made at “Channel Setup”

(

page 126 ~ 128).

Determine what speaker system configuration you want.

Power amplifier assignment flow

Signals are output from the speakers with
priority for the MAIN ZONE channels.

(a)

Assign the power amplifier to the MAIN ZONE
channels set at “Channel Setup”.

The number of free power amplifiers depends
on the setting at (b).

(b)

(c)

Decide what to output to the free power
amplifiers at (c).

Selecting the speaker outputs freely

Using front B

Select “Adv+Front B”.

Select “Advanced”.

Set what channels to assign the power amplifier to.

Select “Normal ”.

Bi-Amp output of
MAIN ZONE front
channel only

Bi-Amp output of
MAIN ZONE
channels

Output ZONE2

Output ZONE3

Output ZONE4

Output ZONE2/3/4

Select
“Bi-Amp Front”.

Select “Bi-Amp”.

Select “+Zone2”.

Select “+Zone3”.

Select “+Zone4”.

Select
“+Zone2/3/4”.

If you do not want to output anything

From (a) to (c) will be done
automatically.