Denon AVR-5805CI - Manual (Page 14)

Easy Setup and Operation
14
Placing the speakers.
Connecting the speakers.
Connect the DVD player to the
AVR-5805CI.
Connect the AVR-5805CI’s
monitor output terminal to
the TV’s video input terminal
(
page 19).
Connecting a microphone ( page 21).
Perform the preliminary measurements.
The measurement of the speakers in the main listening position.
Check of the measurement result.
1) Measuring the background noise (noise in the room).
2) Determining whether or not speakers are connected.
3) Checking the polarities of the speakers.
1) Speaker Configuration
2) Delay Time (speaker distance)
3) Channel Level
4) Crossover Frequency
5) Room EQ
Easy to setup flow
Auto setup flow
Store the measurement result in the memory.
• This section contains the basic steps necessary to configure the AVR-5805CI according to your listening room environment and
the source equipment and loudspeakers you are using.
• For optimum performance, we recommend using the Auto Setup function.
• If you wish, you can set the various settings manually without using Auto Setup (
page 140 ~ 148).
Perform the auto setup procedure, following the
instructions displayed on the TV’s screen.
Play a DVD.
• Do not plug in the power supply cord until all connections have been completed.
By default, the speaker system setting is set
to 9.1 channels.
Please set under “Extra Setup”, only when
you want to change this arrangement.
Extra Setup
1) Channel Setup
2) Power Amplifier Assignment
The measurement of the speakers
in the 2nd to 8th listening position.