Avery Dennison SNAP 700 - Manual (Page 5)

User’s Manual—SNAP™ 700 Printer
4.4 Web Server 51
4.4.1 Setting the Printer IP Address 51
4.4.2 Obtaining a DHCP Address 51
4.4.3 Determining the DHCP Address 52
4.4.4 Converting the DHCP Address to a Static Address 53
4.4.5 Resetting the Printer to DHCP Mode 54
4.4.6 Viewing and Changing the Printer Settings 55
4.4.7 Troubleshooting the Network Connection 56
5.0 MAINTENANCE 57
5.1 Print Head Cleaning and Handling 57
5.1.1 Handling Techniques 57
5.1.2 Cleaning Procedures 58
5.2 Print Head Replacement 59
5.3 Lubrication 62
5.4 Rotary Knife Assembly 62
5.4.1 Removing and Replacing the Knife Assembly 63
5.4.2 Adjust the Knife Home Position 66
5.5 Rubber Roller Replacement 66
6.0 SERVICE ADJUSTMENTS 67
6.1 Stock (Web) Guide Position 67
6.2 Stock (Web) Guide Width Adjustments 67
6.3 Stock Feed 67
6.4 Knife Shear Adjustment 67
7.0 UPGRADING THE PRINTER FIRMWARE 69
7.1 Introduction 69
7.2 Selecting the UPG file 69
7.3 Getting the UPG file 70
7.3.1 Getting UPG file using D2Comm 70
7.3.2 Getting UPG file without using D2Comm 70
7.4 Performing the Upgrade 71
7.4.1 Unzipping the file 71
7.4.2 Upgrading through PCMate 72
7.4.3 Upgrading through USB Flash Drive 75
7.4.4 Upgrading through the Webserver 75
8.0 ELECTRICAL TROUBLESHOOTING 79
8.1 Power Up / Sign On / Communications 79