Avery Dennison Pathfinder 6057 Weights and Measure User Manual
Transferring files to the printer, Startup, Logging on
Pathfinder
6057
Printer Instructions
Weights and Measures
Overview
♦ Transfer files to the printer
♦ Calibrate supplies
♦ Log on, enter/store information, and
select retail or supermarket pricing
♦ Set system processing parameters
♦ Scan bar code and enter price with
optional description
♦ Print list of scanned items with bar
codes and prices
♦ Scan list at Point of Sale (POS) to
compare prices and enter
discrepancies on the printer
♦ Print list of discrepancies or
summary reports
♦ Clear data to start next audit
♦ Check the battery charge level
TC6057WMUM Rev. AA 4/14 ©2013 Avery Dennison Corp.
All rights reserved.
Transferring Files to the Printer
To transfer files between the printer and a computer,
use Microsoft
ActiveSync Synchronization
Software on your computer. See the USB Driver
Installation Guide for more information.
Startup
From the Windows® Start Menu select Programs,
then WeightsMeasures.
Logging On
Note:
Refer to the Operator’s Handbook for
information about data entry modes.
1. Change County: (enter 1–13 characters).
Select Enter.
Note:
Only available at initial prompt.
2. Enter I.D.: (1–10 characters). Select Enter.
♦
The software remembers the last ID and
store name input. Select Skip to keep them
the same and open the main menu.
3. Enter Name: (Store Name, 0–25 characters).
Select Enter.
4. Enter Address: (0–17 characters). Select
Enter.
5. Enter City: (0–17 characters). Select Enter.
6. Select Retail to allow percent off for discounted
prices –OR– select Supermarket for non-
discounted prices. Select Enter.
Processing Merchandise
Note:
When prompted for price, do not use
decimal points. For example,
enter 169 for $1.69.
1. Select Collect Data.
2. Set up Aisle Options.
Aisle Set Up Options
1. Select Aisle from the toolbar (Repeat steps 2-4
before each new scan).
2. Enter aisle number and select Enter.
3. Select Description from the tool bar if you do
not use the optional database.
4. Enter aisle description and select Enter.
Scanning Items
1. At the Scan Item prompt, scan or enter a bar
code.
2. Supermarket only.
a. Enter Price and select Enter .
b. Enter Bonus Price and select Enter OR
select Enter for no bonus price.
Retail only.
a. Enter Price and select Enter.
b. Enter Discount (1–2 digits) –OR– select
Enter for no discount.
3. Enter Total Qty (only if the Prompt for Quantity
parameter is set). Enter the quantity of the
current item (1–3 digits).
4. Select Enter and repeat steps 1-3.
5. When finished, select Done.
Deleting Items
1. Select Collect Data.
2. Select Delete Item from the tool bar.
3. Scan or enter a bar code. Select Enter.
4. Select Yes from the Delete Item menu.
Printing Data
1. Select Print Data to print collected data.
2. Select the items to print.
c. Select the All radio button to print all items
in the list then select Yes.
d. Select the Single Item radio button to pick
an item to print then select Enter.
e. Select the Range radio button to print a
range of items. Enter the beginning and
ending number of the range then select
Enter.