Avery Dennison SNAP 700 - Manual (Page 12)

12 User’s Manual—SNAP™ 700 Printer
• Internet Connection to access software upgrades and remote diagnostics
Refer to your PCMate Platinum user’s manual for proper installation procedures.
2.1.4 User Safety
1. Follow all of the safety requirements and procedures established for your
facility.
2. Turn off the power to the printer before cleaning, servicing, or replacing
any components.
3. You do not have to turn off the power when loading or changing supplies.
CAUTION: The SNAP 700 printer has some pinch points
which have safeguards design in. AVERY DENNISION
strongly recommends that you do not modify or bypass
these safeguards.
CAUTION: Danger of explosion id battery is incorrectly
replaced. Return product to Avery Dennison for proper
replacement and disposal. Call 1 – 800 – 543 – 6650
Warning: There are hazardous moving parts at the
print head station . Keep hair, loose garments, jewelry
and fingers away.
2.2 Receiving
The SNAP 700 printer’s-shipping carton weighs 90 pounds (40.8 Kg The carton
is large and specially made to protect the printer. It may be awkward or difficult to
move by hand to its installation location.
CAUTION: Do not remove the printer from the carton or
unpack in the shipping / receiving department. Move the
carton to the installation location.
1. Move the SNAP 700 printers with a forklift, fork cart or handcart to its
intended location. It is easier and safer to use one of these handling
devices to move the printer. Leaving the printer in the carton while it is
being moved within your facility will help protect it until placed in its new
location.
2. The stacker and any other accessories purchased for the printer may be
shipped separately.